|
If the codes provided do not work, you can try a Power Scan.
Here are some simple tips before you begin:
When starting a Power Scan after previously manually entering the code, first reprogram the remote to 000 or 222 when using the remote for a TV or VCR; 0000 or 0222 when for the AUX mode. This will give you quicker and more consistant results.
Once the device powers off, press the # button or the address button depending on the type of remote you have.
Manually turn on the device you are trying to program before you begin the Power Scan.
If the scan powers the device off, but does not give full function, re-enter scan mode and continue (for example, there are dozens of RCA TV codes).
Not all devices are supported, and many will only give you basic functions.
If performing the Power Scan correctly then it should not take more than 6 minutes to find the code.
If you are performing a Power Scan in AUX mode, the steps you should follow are below:
Hold down the AUX button so all buttons light up
Enter in prefix 0=TV, 1=VCR, 2=AUX device (i.e., DVD, Stereo amp, etc.)
Press the * button
Press Power then press the Up button like you would with a regular Power Scan.
If you start this procedure and at any time do not press a button within 20 seconds, the remote will end the procedure automatically. Simply start over again.
|
